how to reset the transmission fluid change light on Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the transmission fluid change light on Ram 1500 DT (2019-Present). Step-by-step guide for a quick and easy reset process.

Affected Component

Transmission

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and secured to prevent any movement during the process.

Symptoms

•Transmission fluid change light is illuminated on the dashboard
•No noticeable driving issues

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine, or press the start button without pressing the brake pedal for keyless ignition.
3
Access the vehicle's settings menu using the dashboard controls.
4
Navigate to the 'Maintenance' or 'Service' section in the settings menu.
5
Locate the option for 'Transmission Fluid Change' or similar and select it.
6
Confirm the reset procedure when prompted by the on-screen instructions.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset process.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine, or press the start button without pressing the brake pedal for keyless ignition.
3
Access the vehicle's settings menu using the dashboard controls.
4
Navigate to the 'Maintenance' or 'Service' section in the settings menu.
5
Locate the option for 'Transmission Fluid Change' or similar and select it.
6
Confirm the reset procedure when prompted by the on-screen instructions.

Solution

1. Preparation

Gather the necessary tools.
Ensure that the vehicle is parked safely and the ignition is in the correct position.

Insert the key into the ignition and turn it to the "ON" position without starting the engine, or press the start button without engaging the brake.
Use the steering wheel controls or the dashboard touchscreen to navigate through the menu.

3. Navigating to Maintenance Settings

Select the "Vehicle" or "Settings" option from the main menu.
Scroll down to find "Maintenance" or "Service."

4. Resetting the Transmission Fluid Change Light

Look for "Transmission Fluid Change" in the maintenance menu.
Select the option and confirm when prompted to reset the light.

5. Finalizing

Turn off the ignition and then turn it back on to verify that the transmission fluid change light is no longer illuminated.