how to reset the tire pressure monitoring system in my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

420 words

Problem Statement

Learn how to reset the TPMS in your 2019-present Ram 1500 DT. Step-by-step guide with diagnostic steps, tools required, and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before checking and adjusting tire pressures.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message indicating low tire pressure
•Poor handling or ride quality due to incorrect tire pressure

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer-recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Ensure the spare tire (if equipped with a TPMS sensor) is also properly inflated.
4
Confirm that the vehicle is in a safe location with the engine running or in the 'ON' position.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•TPMS sensors (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer-recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Ensure the spare tire (if equipped with a TPMS sensor) is also properly inflated.
4
Confirm that the vehicle is in a safe location with the engine running or in the 'ON' position.

Solution

1. Preparation

Gather necessary tools: Tire pressure gauge, OBD-II scanner (if needed).
Ensure all tires are properly inflated according to the specifications found on the driver’s door jamb.

2. Resetting the TPMS

Locate the TPMS Reset Button:
- The reset button is usually found beneath the steering column or in the glove compartment.
Turn on the Ignition:
- Without starting the engine, turn the key to the "ON" position (or press the start button without pressing the brake).
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release it. This indicates the system is resetting.
Drive the Vehicle:
- Drive the vehicle for about 10-15 minutes at a speed of 50 km/h (31 mph) or higher. This allows the TPMS to recalibrate and recognize the tire pressures.

3. Verify Reset

After driving, check if the TPMS warning light is still illuminated. If it remains on, repeat the reset process or consult a professional.