how to reset the service light on Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

428 words

Problem Statement

Learn how to reset the service light on your Ram 1500 DT (2019-Present) with this step-by-step guide. Ensure proper maintenance and avoid reminders.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder displayed on the instrument cluster
•Warning messages related to service intervals

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Press the brake pedal and hold it down.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Release the brake pedal once the ignition is on.
5
Navigate to the 'Settings' menu using the vehicle’s infotainment system.
6
Select 'Vehicle' then 'Oil Life' or 'Service' options in the menu.
7
Follow prompts to reset the service light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional)

Parts Required

•None needed specifically for resetting the service light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Press the brake pedal and hold it down.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Release the brake pedal once the ignition is on.
5
Navigate to the 'Settings' menu using the vehicle’s infotainment system.
6
Select 'Vehicle' then 'Oil Life' or 'Service' options in the menu.
7
Follow prompts to reset the service light.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if applicable for your method).
Ensure the vehicle is parked on a level surface with the ignition off.

2. Access the Ignition

Sit in the driver’s seat and close all doors.
Insert the key fob into the ignition or have it within proximity for push-start models.

3. Turn On Ignition

Press the brake pedal and keep it pressed.
Turn the ignition key to the "On" position or press the start button while keeping the brake pedal depressed (but do not start the engine).

4. Reset the Service Light

Release the brake pedal once the ignition is on.
On the infotainment screen, navigate to “Settings” using the touchscreen.
Select “Vehicle” and then scroll to “Oil Life” or “Service” options.
Choose “Reset” or “Clear” to reset the service light.
Confirm the action if prompted.

5. Finalize

Turn the ignition off and wait for a few moments.
Start the engine to ensure the service light is no longer illuminated.