how to reset the oil change light on Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

377 words

Problem Statement

Learn how to reset the oil change light on Ram 1500 DT (2019-Present) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe area with the engine off before performing these steps.

Symptoms

•Oil change light illuminated on the dashboard
•Message indicating 'Oil Change Required' or similar
•No other warning lights present

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Press the brake pedal fully while the ignition is in the OFF position.
3
Turn the ignition key to the ON position (do not start the engine).
4
Wait for the dashboard lights to illuminate, then release the brake pedal.
5
Press the gas pedal three times within 10 seconds.
6
Turn the ignition OFF and then ON again to check if the light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key or key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Press the brake pedal fully while the ignition is in the OFF position.
3
Turn the ignition key to the ON position (do not start the engine).
4
Wait for the dashboard lights to illuminate, then release the brake pedal.
5
Press the gas pedal three times within 10 seconds.
6
Turn the ignition OFF and then ON again to check if the light is reset.

Solution

1. Preparation

Gather necessary tools such as the ignition key.
Ensure the vehicle is in a safe and level area.

2. Ignition Sequence

Turn off the ignition: Make sure the vehicle is completely off.
Press and hold the brake pedal: This is necessary to prepare for the reset.
Turn ignition to ON: Rotate the key or press the push button to turn the ignition on, without starting the engine.
Release the brake pedal: After the dashboard lights come on, release the brake.

3. Reset the Oil Change Light

Press the gas pedal: Quickly press the accelerator pedal three times within ten seconds.
Turn off the ignition: After the third press, turn the ignition back to the OFF position.

4. Verify the Reset

Turn the ignition back ON: Check if the oil change light is no longer illuminated.