how to reset the engine light on my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

360 words

Problem Statement

Learn how to reset the engine light on your Ram 1500 DT (2019-Present). Step-by-step instructions for diagnosing and resolving the issue.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and the parking brake is engaged before starting any work on the vehicle.

Symptoms

•Check engine light illuminated
•Possible diagnostic trouble codes (DTCs) stored in the system
•Engine may run normally but the light remains on
•Potential pending codes affecting vehicle performance

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to read any stored trouble codes.
2
Diagnose the cause of the check engine light by interpreting the codes.
3
Address any underlying issues indicated by the codes if necessary before resetting.
4
Ensure all systems are functioning properly to prevent the light from re-illuminating.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to read any stored trouble codes.
2
Diagnose the cause of the check engine light by interpreting the codes.
3
Address any underlying issues indicated by the codes if necessary before resetting.
4
Ensure all systems are functioning properly to prevent the light from re-illuminating.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather the required tools: OBD-II scanner and vehicle owner's manual.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard near the steering column.
Plug in the OBD-II scanner and turn on the vehicle ignition without starting the engine.

3. Reset Check Engine Light

Follow the prompts on the OBD-II scanner to select the “Erase Codes” or “Reset” option.
Confirm the action when prompted to clear the codes and reset the check engine light.

4. Disconnect OBD-II Scanner

Once the reset is complete, unplug the OBD-II scanner from the port.
Turn off the vehicle and wait a few moments before restarting to check if the light is off.