FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0700 code on my Ram 1500 DT (2019-Present)

how to fix P0700 code on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07002-4 hours
3 min read
513 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control issues in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Component
Transmission
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow the engine to cool before working on the transmission.

Symptoms

  • •Check engine light illuminated
  • •Transmission slipping or erratic shifting
  • •Harsh engagement during gear changes
  • •Reduced fuel efficiency
  • •Vehicle may go into limp mode

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0700 and check for any additional transmission-related codes.
  2. 2Inspect the transmission fluid level and condition; look for contamination or burnt smell.
  3. 3Check the wiring and connectors to the transmission control module for damage or loose connections.
  4. 4Test the transmission control module with a multimeter to ensure it’s receiving proper voltage and ground.
  5. 5Use a scan tool to perform a live data check on transmission parameters while the vehicle is being driven.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety during repairs.

2. Inspect and Change Transmission Fluid

  • Sub-steps:
    1. Raise the vehicle and secure it on jack stands.
    2. Locate the transmission pan and remove the bolts using a socket set.
    3. Drain the old transmission fluid into a suitable container.
    4. Replace the transmission filter if applicable.
    5. Reinstall the transmission pan and torque the bolts to the manufacturer's specifications (typically around 10-12 Nm).
    6. Fill the transmission with new fluid (use the manufacturer-recommended type, usually ATF+4).

3. Repair or Replace TCM

  • Sub-steps:
    1. Locate the transmission control module (usually near the transmission or under the dashboard).
    2. Disconnect the wiring harness from the TCM.
    3. Remove the TCM using the appropriate tools (usually a socket set).
    4. Install the new or repaired TCM.
    5. Reconnect the wiring harness and ensure all connections are secure.

4. Clear Codes and Test Drive

  • Sub-steps:
    1. Reconnect the battery.
    2. Use the OBD-II scanner to clear the P0700 code and any additional transmission codes.
    3. Start the vehicle and allow it to idle for a few minutes.
    4. Conduct a test drive to ensure smooth transmission operation and that the check engine light does not reappear.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Multimeter
  • Fluid transfer pump

Parts Required

  • Transmission fluid (ATF+4)
  • Transmission filter (if applicable)
  • Transmission control module (if required)

Additional Information

Error CodeP0700
Component

Transmission

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

3 items

Related Faults

  1. why is my Ram 1500 DT (2019-Present) making a popping noise in the front end?

    Learn how to diagnose and fix popping noise in the front end of your Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  2. why is my Ram 1500 DT (2019-Present) oil pressure warning light on

    Learn how to diagnose and fix the oil pressure warning light issue in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms

  3. why does my Ram 1500 DT (2019-Present) transmission shudder when accelerating

    Learn how to diagnose and fix transmission shudder in 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission6 symptoms

  4. how to replace the battery in my Ram 1500 DT (2019-Present) key fob

    Learn how to replace the battery in your Ram 1500 DT key fob. Step-by-step guide with symptoms, diagnostic steps, and tools required.

    Electrical5 symptoms

  5. how to tell if my Ram 1500 DT (2019-Present) fuel pump is failing

    Learn how to diagnose and fix fuel pump issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  6. how to diagnose electrical problems in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix electrical problems in your 2019-Present Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation