FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0302 code on my Ram 1500 DT (2019-Present)

how to fix P0302 code on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03022-4 hours
3 min read
497 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems to avoid shorts.
  • ⚠Allow the engine to cool before working on any components to prevent burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Loss of power during acceleration
  • •Increased fuel consumption
  • •Engine stalling

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0302 and check for any additional codes.
  2. 2Inspect the spark plug and ignition coil for cylinder 2 for wear, damage, or carbon buildup.
  3. 3Perform a visual inspection of the wiring harness and connectors related to cylinder 2 for any signs of damage or corrosion.
  4. 4Conduct a compression test on cylinder 2 to ensure there are no mechanical issues affecting performance.
  5. 5Check fuel injector operation for cylinder 2 using a noid light or multimeter to verify proper electrical function.
  6. 6Inspect the intake manifold and vacuum lines for any leaks that might affect cylinder performance.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Replace Spark Plug and Ignition Coil

  • Remove the engine cover if applicable.
  • Use a socket set to remove the ignition coil bolts.
  • Disconnect the ignition coil electrical connector.
  • Remove the ignition coil and inspect it for damage.
  • Remove the spark plug with a spark plug socket and inspect for wear or fouling.
  • Install a new spark plug with a gap set to manufacturer specifications (typically 0.040 inches).
  • Install the new ignition coil and reconnect the electrical connector.
  • Torque the ignition coil bolts to the specified value (usually around 89 in-lbs).

3. Test Fuel Injector

  • Connect a noid light to the fuel injector connector for cylinder 2.
  • Crank the engine and observe the noid light for proper flashing, indicating injector operation.
  • If the injector does not function, replace the fuel injector.

4. Reassemble and Reconnect

  • Reinstall the engine cover if it was removed.
  • Reconnect the negative battery terminal.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Noid light
  • Multimeter

Parts Required

  • Spark plug for cylinder 2
  • Ignition coil for cylinder 2
  • Fuel injector for cylinder 2 (if needed)

Additional Information

Error CodeP0302
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

3 items

Related Faults

  1. why is my Ram 1500 DT (2019-Present) oil pressure warning light on

    Learn how to diagnose and fix the oil pressure warning light issue in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms

  2. how to replace the battery in my Ram 1500 DT (2019-Present) key fob

    Learn how to replace the battery in your Ram 1500 DT key fob. Step-by-step guide with symptoms, diagnostic steps, and tools required.

    Electrical5 symptoms

  3. why does my Ram 1500 DT (2019-Present) battery die after a few days

    Learn how to diagnose and fix battery drain issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms

  4. my Ram 1500 makes a loud noise when hitting bumps what could it be

    Learn how to diagnose and fix loud noise when hitting bumps in Ram 1500. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  5. my Ram 1500 loses RPMs while driving what's the problem

    Learn how to diagnose and fix engine RPM loss in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

    Engine6 symptoms

  6. how to troubleshoot my Ram 1500 DT (2019-Present) fuel pump issues

    Learn how to troubleshoot and fix fuel pump issues in your 2019 Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

    Fuel System6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation