FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0171 code on Ram 1500 DT (2019-Present)

how to fix P0171 code on Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P01712-4 hours
4 min read
609 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0171 engine too lean condition in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0171
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before opening the intake or fuel systems.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or stalling
  • •Loss of power during acceleration
  • •Poor fuel economy
  • •Increased emissions

Diagnostic Steps

  1. 1Scan the vehicle's OBD-II system using a scanner to confirm the P0171 code and check for any additional codes.
  2. 2Inspect the air intake system for vacuum leaks, including hoses, gaskets, and the throttle body.
  3. 3Check the fuel pressure using a fuel pressure gauge to ensure it meets specifications.
  4. 4Inspect the Mass Air Flow (MAF) sensor for dirt or damage, and clean or replace as necessary.
  5. 5Examine the fuel injectors for proper operation and any signs of blockage.
  6. 6Check the engine coolant temperature sensor for correct operation, as it can affect fuel mixture.

Solution

Solution

1. Preparation

  • Gather tools and parts needed for the repair.
  • Disconnect the negative terminal of the battery to prevent electrical shorts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.

2. Inspect and Repair Vacuum Leaks

  • Tools Required: Vacuum gauge, hose clamps, screwdriver, inspection mirror.
  • Use a vacuum gauge to test for leaks in the intake manifold and associated hoses.
  • Inspect visually and use the inspection mirror to check hard-to-reach areas.
  • Replace or tighten any loose or damaged hoses and gaskets as needed.

3. Check and Clean the MAF Sensor

  • Tools Required: MAF sensor cleaner, screwdriver.
  • Remove the MAF sensor from the air intake duct.
  • Spray the MAF sensor with MAF cleaner and allow it to dry completely before reinstallation.
  • Reinstall the MAF sensor and ensure it is securely fastened.

4. Test and Adjust Fuel Pressure

  • Tools Required: Fuel pressure gauge, safety glasses.
  • Connect the fuel pressure gauge to the fuel rail test port.
  • Turn the ignition to the "On" position (do not start the engine) and check the fuel pressure reading.
  • Compare the reading to the manufacturer’s specifications. If it is low, check the fuel pump and filter for issues and replace if necessary.

5. Inspect Fuel Injectors

  • Tools Required: Fuel injector cleaning kit, multimeter (optional).
  • Remove the fuel injectors from the fuel rail.
  • Use a fuel injector cleaning kit to clean the injectors or replace them if they are blocked or malfunctioning.
  • Reinstall the injectors, ensuring proper sealing and seating.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Vacuum gauge
  • Fuel pressure gauge
  • MAF sensor cleaner
  • Screwdriver set
  • Fuel injector cleaning kit

Parts Required

  • Vacuum hoses (if damaged)
  • Gaskets (if leaking)
  • Fuel filter (if clogged)
  • Fuel injectors (if malfunctioning)

Additional Information

Error CodeP0171
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

6 items

Parts

4 items

Related Faults

  1. what causes the P0420 code in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0420 catalytic converter efficiency issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms

  2. how to fix Ram 1500 DT (2019-Present) transfer case problems

    Learn how to diagnose and fix transfer case problems in the 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  3. how to fix the P0300 code on my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0300 random/multiple cylinder misfire in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0300Engine6 symptoms

  4. my Ram 1500 won't shift into reverse what could be wrong

    Learn how to diagnose and fix the issue of Ram 1500 not shifting into reverse. Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms

  5. my Ram 1500 is hard to start when cold what's the issue

    Learn how to diagnose and fix cold start issues in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  6. what are the common causes of shaking in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix shaking issues in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation