FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix C0031 code on my Ram 1500 DT (2019-Present)

how to fix C0031 code on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: C00311-2 hours
3 min read
520 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0031 code related to the left front wheel speed sensor in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
C0031
Component
Brakes
Repair Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems to prevent shorts.
  • ⚠Always use jack stands when working under the vehicle to avoid accidents.

Symptoms

  • •ABS warning light illuminated on the dashboard
  • •Traction control light activated
  • •Erratic speedometer readings
  • •Vehicle may experience improper braking behavior
  • •Reduced effectiveness of traction control system

Diagnostic Steps

  1. 1Scan the vehicle’s computer with an OBD-II scanner to confirm the C0031 code and check for additional codes.
  2. 2Inspect the wiring and connectors of the left front wheel speed sensor for damage or corrosion.
  3. 3Measure resistance of the left front wheel speed sensor using a multimeter to ensure it is within specification.
  4. 4Check the ABS module for fault codes and perform a visual inspection for any physical damage.
  5. 5Test the wheel speed sensor signal using a lab scope or oscilloscope while spinning the wheel to confirm proper signal output.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the vehicle's battery to ensure safety.
  • Raise the front of the vehicle using jack stands and remove the left front wheel.

2. Inspect and Replace Wheel Speed Sensor

  • Inspect Wiring and Connectors

    • Check the wiring harness leading to the left front wheel speed sensor for frays, breaks, or corrosion.
    • Clean or repair any damaged wiring or connectors.

  • Remove the Old Wheel Speed Sensor

    • Locate the left front wheel speed sensor mounted to the wheel hub.
    • Use a socket or wrench to remove the mounting bolt securing the sensor.
    • Carefully pull the sensor out of its housing.

  • Install the New Wheel Speed Sensor

    • Insert the new wheel speed sensor into the housing.
    • Secure it with the mounting bolt and tighten to the manufacturer’s specifications (typically around 10 ft-lbs).
    • Reconnect the electrical connector ensuring it clicks into place.

3. Reassemble and Test

  • Reinstall the left front wheel and lower the vehicle.
  • Reconnect the battery.
  • Clear the fault codes using the OBD-II scanner and take the vehicle for a test drive to ensure the ABS and traction control systems are functioning correctly.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Socket set
  • Torque wrench
  • Jack and jack stands

Parts Required

  • Left front wheel speed sensor
  • Electrical contact cleaner (if needed)

Additional Information

Error CodeC0031
Component

Brakes

Repair Time

1-2 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

2 items

Related Faults

  1. what causes my Ram 1500 DT (2019-Present) to stall while driving

    Learn how to diagnose and fix engine stalling issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  2. why does my Ram 1500 DT (2019-Present) have a knocking noise when idling

    Diagnose and fix knocking noise at idle in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

    Engine6 symptoms

  3. how to resolve low oil pressure in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix low oil pressure in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  4. why does my Ram 1500 DT (2019-Present) dashboard light flicker

    Learn how to diagnose and fix dashboard light flickering in 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

  5. why does my Ram 1500 DT (2019-Present) have poor acceleration

    Learn how to diagnose and fix poor acceleration issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  6. why does my Ram 1500 DT (2019-Present) have a check engine light after oil change

    Learn how to diagnose and fix the check engine light issue after an oil change in a Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation