FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I fix the transmission slipping on my Ram 1500 DT (2019-Present)? - Ram 1500
Home/Cars/Ram/1500/DT (2019-Present)/how do I fix the transmission slipping on my Ram 1500 DT (2019-Present)?

how do I fix the transmission slipping on my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
573 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow engine to cool before opening any components to prevent burns.

Symptoms

  • •Engine revs without corresponding increase in vehicle speed
  • •Delayed engagement when shifting from park to drive or reverse
  • •Unusual noises during gear changes (e.g., grinding or whining)
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Fluid leaks under the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Fluid pressure gauge
  • •Jack and jack stands
  • •Funnel

Parts Required

  • •Transmission filter (if applicable)
  • •Transmission pan gasket (if applicable)
  • •Transmission fluid

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Fluid Change
  1. Raise the Vehicle: Use a jack and jack stands to lift the vehicle securely.
  2. Remove Transmission Pan:
    • Use a socket set to remove the bolts securing the transmission pan.
    • Carefully lower the pan to avoid spilling fluid.
  3. Drain Old Fluid: Allow old transmission fluid to drain completely into a suitable container.
  4. Replace Filter: If applicable:
    • Remove the old transmission filter and install the new one, ensuring it is seated properly.
    • Use a new gasket for the pan if required.
  5. Install Transmission Pan:
    • Clean the mating surfaces, apply gasket maker if needed, and reinstall the pan.
    • Torque the pan bolts to manufacturer specifications.
  6. Refill Transmission Fluid:
    • Using a funnel, pour the correct type of transmission fluid into the dipstick tube until it reaches the full mark.
3. Electrical Inspection
  1. Inspect Wiring: Check all wiring harnesses and connectors for damage or corrosion. Repair or replace as necessary.
  2. Test Solenoids: Use a multimeter to test the transmission solenoids for proper resistance and function.
4. Road Test
  • Start the vehicle and allow it to reach operating temperature.
  • Test drive the vehicle to ensure smooth shifting and that slipping has been resolved.