how to resolve Honda Pilot YF4 (2023-Present) issues with the lane keeping assist system?

Solution

1. Preparation

• Gather all necessary tools and parts.
• Ensure the vehicle is parked on a flat surface and turn off the ignition.
• Disconnect the negative battery terminal to avoid electrical shorts.

2. Clean Front Camera and Sensors

• Locate the front camera and sensors mounted on the windshield and front bumper.
• Use a microfiber cloth and a suitable glass cleaner to gently clean the camera lens and sensor areas.
• Reconnect the battery terminal and start the vehicle to check if the warning light is cleared.

3. Steering Angle Sensor Calibration

• Reconnect the negative battery terminal.
• Use a diagnostic scanner to access the steering angle sensor calibration menu.
• Follow the on-screen prompts to recalibrate the sensor. This usually involves turning the steering wheel fully left and right and returning to the center position.
• Confirm successful calibration on the scanner.

4. Software Update

• Check the manufacturer’s website or use a diagnostic tool to see if there are any available software updates for the lane keeping assist system.
• If updates are available, follow the manufacturer’s instructions to install the latest software.

5. Battery Voltage and Connections

• Use a multimeter to check the voltage of the battery; it should be around 12.6 volts when the vehicle is off.
• Inspect battery cables for corrosion or loose connections. Clean and tighten as necessary.
• Test each fuse related to the lane keeping assist system to ensure they are functioning correctly.