how to reset the Honda Pilot YF3 (2016-2022) maintenance light?

Honda Pilot YF4 (2023-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

339 words

Problem Statement

Learn how to reset the maintenance light on your 2016-2022 Honda Pilot YF3. Follow our step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the engine is off before performing the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•Reminder for oil change or service is displayed
•Vehicle indicates a need for scheduled maintenance

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'Park' position.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Press the 'Gas' pedal three times within 5 seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Check the maintenance light to confirm if it has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'Park' position.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Press the 'Gas' pedal three times within 5 seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Check the maintenance light to confirm if it has turned off.

Solution

1. Preparation

Gather necessary tools: none required for this process.
Ensure the vehicle is parked on a level surface with the engine off.

2. Accessing the Ignition

Insert the key into the ignition or press the start button to enter accessory mode (without starting the engine).

3. Resetting the Maintenance Light

Press the "Gas" pedal three times within 5 seconds. This action signals the system to prepare for the reset.

4. Confirming the Reset

Turn the ignition switch to the "ON" position without starting the engine.
Observe the maintenance light; it should turn off if the reset was successful.

5. Final Checks

Turn off the ignition and start the engine to ensure the maintenance light remains off during operation.