how to reset the electronic parking brake on my Honda Pilot YF4 (2023-Present)

Solution

1. Preparation

• Ensure the vehicle is parked on a level surface and the ignition is off.
• Gather necessary tools: OBD-II scanner (if needed).

2. Resetting the Electronic Parking Brake

1. Turn on the Ignition

   • Insert the key fob into the ignition and turn it to the "ON" position without starting the engine.

2. Engage the Parking Brake

   • Press the parking brake switch to engage the electronic parking brake. Hold it for about 3 seconds.

3. Disengage the Parking Brake

   • Press the parking brake switch again to disengage it while keeping the ignition in the "ON" position.

4. Perform the Reset Procedure

   • While holding the parking brake switch in the "disengaged" position, press and hold the brake pedal.
   • After a few seconds, the system should reset, and you may hear a click sound indicating a successful reset.

5. Check for Warning Lights

   • Observe the dashboard to ensure the parking brake warning light turns off after the reset.