my Honda Pilot's power window won't go up what should I do

Solution

1. Preparation

• Gather tools: screwdriver set, multimeter, socket set, and a trim removal tool.
• Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Remove Door Panel

• Use a trim removal tool to pry off the door panel carefully.
• Remove screws securing the door panel, typically located near the handle and bottom of the panel.
• Gently lift the door panel off and disconnect any wiring harnesses attached to it.

3. Inspect Window Motor and Switch

• Locate the window motor inside the door.
• Disconnect the motor's electrical connector.
• Use a multimeter to check for voltage when the switch is activated. If there is voltage, the motor may need replacement.
• If no voltage is present, inspect the switch for proper function and continuity.

4. Replace Window Motor (if necessary)

• If the motor is faulty, remove the bolts securing it to the door.
• Install the new window motor by reversing the removal steps, ensuring it's securely mounted.
• Reconnect the electrical connector.

5. Reassemble Door Panel

• Reconnect any wiring harnesses removed earlier.
• Align the door panel with the door frame and press it back into place.
• Reinstall screws and ensure the panel is securely fastened.

6. Testing

• Reconnect the vehicle battery.
• Test the power window function to ensure proper operation.