FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Pilot YF3 (2016-2022) - Honda Pilot
Home/Cars/Honda/Pilot/YF3 (2016-2022)/how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot YF3 (2016-2022)

Error Codes
Less than 15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
301 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot YF3 (2016-2022) with this simple step-by-step guide. Ensure your vehicle is ready for service.

Affected Component
Electrical
Estimated Time
Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Make sure the vehicle is in a safe location before performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Possible reminder for scheduled maintenance services
  • •Engine oil change required notification (if applicable)

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
Less than 15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this reset.
  • Ensure the vehicle is parked on a level surface with the engine off but the ignition in the "ON" position.
2. Reset the Maintenance Light
  1. Turn the ignition to the "ON" position without starting the engine.
  2. Fully depress the gas pedal three times within a span of five seconds.
  3. Watch for the maintenance light to blink and then turn off, indicating that the reset was successful.
  4. Turn the ignition off and then back on to confirm that the maintenance light has not reappeared.