how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot YF3 (2016-2022)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

370 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot (2016-present). Step-by-step guide with diagnostic steps and verification instructions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible message display on the multi-information display regarding maintenance
•No performance issues or warnings other than the maintenance light

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Verify that the odometer is displayed on the instrument panel.
3
Access the settings menu on the multi-information display using the steering wheel controls.
4
Navigate to the 'Maintenance' section using the multi-information display controls.
5
Select the option to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None necessary; this is a reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Verify that the odometer is displayed on the instrument panel.
3
Access the settings menu on the multi-information display using the steering wheel controls.
4
Navigate to the 'Maintenance' section using the multi-information display controls.
5
Select the option to reset the maintenance light.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked safely and in "ON" position without starting the engine.

2. Access the Instrument Cluster

Turn the ignition switch to the "ON" position (do not start the engine).
Ensure the odometer is displayed on the instrument panel.

3. Navigate to Maintenance Settings

Use the steering wheel controls to scroll through the multi-information display.
Find the settings menu and navigate to "Maintenance."

4. Reset the Maintenance Light

Select the option for resetting the maintenance light.
Confirm the reset when prompted by pressing the appropriate button, often the "Enter" or "OK" button.

5. Verify Reset

Turn off the ignition and then restart the vehicle.
Check that the maintenance light is no longer illuminated on the dashboard.