how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot YF3 (2016-2022)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

374 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) with this step-by-step guide. Quick and easy procedure.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before starting the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Vehicle may indicate upcoming maintenance needs
•No other performance issues are present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer display is showing the total mileage, not the trip mileage.
3
Press and hold the 'Select/Reset' knob on the instrument panel.
4
While holding the knob, turn the ignition switch to the 'OFF' position and then back to 'ON.'
5
Continue holding the 'Select/Reset' knob until the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer display is showing the total mileage, not the trip mileage.
3
Press and hold the 'Select/Reset' knob on the instrument panel.
4
While holding the knob, turn the ignition switch to the 'OFF' position and then back to 'ON.'
5
Continue holding the 'Select/Reset' knob until the maintenance light resets.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked in a safe location with the engine off.

2. Turn Ignition On

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Confirm that all dashboard lights, including the maintenance light, are illuminated.

3. Reset the Maintenance Light

Locate the "Select/Reset" knob on the instrument panel.
Press and hold the "Select/Reset" knob until the odometer display shows the total mileage.
While still holding the knob, turn the ignition switch to the "OFF" position.
Turn the ignition switch back to the "ON" position while continuing to hold the knob.
Hold the "Select/Reset" knob until the maintenance light blinks and then turns off.

4. Final Check

Release the "Select/Reset" knob and turn the ignition off.
Start the engine to verify that the maintenance light is no longer illuminated.