FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Pilot's exhaust smell like gas - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/why does my Honda Pilot's exhaust smell like gas

why does my Honda Pilot's exhaust smell like gas

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
499 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the gasoline smell from the exhaust in your Honda Pilot. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool before inspecting the fuel system to prevent burns

Symptoms

  • •Strong gasoline smell from the exhaust
  • •Decreased fuel efficiency
  • •Engine stalling or rough idle
  • •Check engine light illuminated
  • •Increased emissions
  • •Possible black smoke from the exhaust

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Wrench set
  • •Socket set
  • •Fuel pressure gauge
  • •Multimeter
  • •Fuel injector cleaner

Parts Required

  • •Fuel injectors (if faulty)
  • •Oxygen sensors (if faulty)
  • •Fuel line repair kits (if needed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect Fuel System
  • Tools Required: Wrench set, fuel pressure gauge.
  • Inspect fuel lines for leaks:
    1. Visually check the lines for cracks or wet spots.
    2. Use a fuel pressure gauge to ensure pressure is within manufacturer's specifications.
  • Repair or replace any damaged lines.
3. Check Fuel Injectors
  • Tools Required: Socket set, fuel injector cleaner.
  • Remove the fuel injectors:
    1. Disconnect the electrical connectors.
    2. Remove the retaining clips and pull the injectors out of the rail.
  • Clean or replace any faulty injectors:
    1. Use a fuel injector cleaner to clear any blockage.
    2. Replace any injectors that show signs of leakage or malfunction.
4. Examine and Replace Oxygen Sensors
  • Tools Required: Socket set, multimeter.
  • Remove and test the oxygen sensors:
    1. Unplug the sensors from the wiring harness.
    2. Use a multimeter to check the resistance and voltage output.
  • Replace any sensors that do not meet specifications.
5. Reassemble and Reconnect
  • Reinstall all components:
    1. Ensure all connections are secure.
    2. Reconnect the battery.
  • Clear the error codes with the OBD-II scanner.