why does my Honda Pilot make noise when I accelerate

Honda Pilot Third Generation (2016-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

479 words

Problem Statement

Learn to diagnose and fix unusual noises during acceleration in Honda Pilot. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before inspecting components.

Symptoms

•Noise increases with acceleration
•Rattling or grinding sounds
•Whining or whining noise
•Vibration felt through the steering wheel or floor
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect the exhaust system for loose components or leaks.
2
Check the engine and transmission mounts for wear or damage.
3
Scan the vehicle's computer for any diagnostic trouble codes (DTCs).
4
Test drive the vehicle to identify the nature and location of the noise.
5
Check the condition of the drive belts and pulleys for wear.
6
Inspect the transmission fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Belt tensioner tool
•OBD-II scanner
•Funnel

Parts Required

•Exhaust components (if damaged)
•Engine and transmission mounts
•Drive belts (if worn)
•Transmission fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the exhaust system for loose components or leaks.
2
Check the engine and transmission mounts for wear or damage.
3
Scan the vehicle's computer for any diagnostic trouble codes (DTCs).
4
Test drive the vehicle to identify the nature and location of the noise.
5
Check the condition of the drive belts and pulleys for wear.
6
Inspect the transmission fluid level and condition.

Solution

1. Preparation

Gather tools and parts needed for repairs.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to ensure safety.

2. Inspect Exhaust System

Sub-steps:
1. Raise the vehicle using jack stands for access.
2. Visually inspect the exhaust pipes, muffler, and catalytic converter for damage.
3. Tighten any loose connections and replace any damaged components.
Tools Required: Jack and jack stands, socket set.

3. Check Engine and Transmission Mounts

Sub-steps:
1. Locate the engine and transmission mounts.
2. Inspect mounts for cracks or excessive wear.
3. Replace any faulty mounts with new ones.
Tools Required: Socket set, torque wrench.

4. Replace Drive Belts or Pulleys (if needed)

Sub-steps:
1. Inspect drive belts for fraying or cracking.
2. If damaged, loosen the tensioner and remove the old belt.
3. Install a new belt, ensuring proper tension.
Tools Required: Socket set, belt tensioner tool.

5. Transmission Fluid Check and Change (if necessary)

Sub-steps:
1. Remove the transmission dipstick and check fluid level and condition.
2. If fluid is low or dirty, drain the old fluid and replace it with fresh transmission fluid.
3. Recheck fluid level after adding new fluid.
Tools Required: Funnel, transmission fluid, socket set.