FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Pilot Third Generation (2016-present) has poor fuel economy, what could be wrong? - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/my Honda Pilot Third Generation (2016-present) has poor fuel economy, what could be wrong?

my Honda Pilot Third Generation (2016-present) has poor fuel economy, what could be wrong?

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
550 words

Problem Statement

Diagnose and fix poor fuel economy issues in Honda Pilot Third Generation (2016-present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the hood or inspecting the fuel system.

Symptoms

  • •Check engine light illuminated
  • •Decreased miles per gallon (MPG)
  • •Rough idle or engine stalling
  • •Unusual fuel odors
  • •Increased emissions from exhaust
  • •Reduced power during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Tire pressure gauge
  • •Air filter replacement
  • •Fuel pressure gauge
  • •Spark plug socket set

Parts Required

  • •Air filter
  • •Fuel filter (if applicable)
  • •Spark plugs
  • •Fuel injectors (if needed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, tire pressure gauge, air filter replacement, fuel pressure gauge, spark plug socket set.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
2. Addressing Error Codes
  • Use the OBD-II scanner to retrieve and document any error codes.
  • Research the codes to determine necessary repairs (e.g., faulty sensors, misfires).
3. Tire Maintenance
  • Remove the valve caps from each tire.
  • Use the tire pressure gauge to check the pressure of each tire.
  • Inflate tires to manufacturer-recommended PSI levels or replace if excessively worn.
4. Air Filter Replacement
  • Open the hood and locate the air filter housing.
  • Release the clips or screws securing the housing and remove the old air filter.
  • Install the new air filter, ensuring it sits properly in the housing, then secure the housing.
5. Fuel System Inspection
  • Connect the fuel pressure gauge to the fuel rail and turn the ignition on (do not start the engine).
  • Check the pressure reading against the manufacturer's specifications; replace the fuel pump if low.
  • For clogged injectors, consider using a fuel injector cleaning kit to clean them.
6. Spark Plug and Ignition Coil Inspection
  • Disconnect the battery to ensure safety.
  • Remove the spark plug wires and unscrew the spark plugs using the appropriate socket.
  • Inspect the spark plugs for wear; replace if necessary.
  • Check ignition coils for proper operation and replace if faulty.