my Honda Pilot shows P0135 code what does it mean

Honda Pilot Third Generation (2016-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0135

3 min read

433 words

Problem Statement

Learn how to diagnose and fix P0135 oxygen sensor circuit malfunction in Honda Pilot. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0135

Affected Component

Exhaust System

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the exhaust system to cool before handling the oxygen sensor.

Symptoms

•Check engine light illuminated
•Poor fuel economy
•Rough idle
•Increased emissions
•Engine stalling during acceleration

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the P0135 code and check for related codes.
2
Visually inspect the wiring and connectors of the bank 1 oxygen sensor for damage or corrosion.
3
Measure the voltage output of the oxygen sensor using a multimeter to ensure it's within the specified range.
4
Check the vehicle's fuse related to the oxygen sensor circuit.
5
Inspect the exhaust system for leaks that could affect sensor readings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Oxygen sensor socket
•Ratchet
•Extension
•Multimeter

Parts Required

•New oxygen sensor (OEM recommended)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the P0135 code and check for related codes.
2
Visually inspect the wiring and connectors of the bank 1 oxygen sensor for damage or corrosion.
3
Measure the voltage output of the oxygen sensor using a multimeter to ensure it's within the specified range.
4
Check the vehicle's fuse related to the oxygen sensor circuit.
5
Inspect the exhaust system for leaks that could affect sensor readings.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Remove the Oxygen Sensor

Tools Required: Oxygen sensor socket, ratchet, and extension.
Locate the bank 1 oxygen sensor (usually near the exhaust manifold).
Use the oxygen sensor socket to unscrew and remove the faulty oxygen sensor.

3. Inspect and Repair Wiring

Check the wiring harness and connectors for any visible damage, fraying, or corrosion.
If damage is found, repair or replace the wiring as necessary, ensuring all connections are secure.

4. Install New Oxygen Sensor

Parts Required: New oxygen sensor (make sure it matches OEM specifications).
Apply anti-seize compound to the threads of the new sensor (if required).
Install the new oxygen sensor by threading it into the exhaust manifold and tightening it to the manufacturer's specifications (typically 30-40 ft-lbs).

5. Reconnect Battery and Clear Codes

Reconnect the negative battery terminal.
Use the OBD-II scanner to clear the P0135 code from the vehicle’s computer.