how to reset the maintenance light on my Honda Pilot Third Generation (2016-present)?

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

381 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot Third Generation (2016-present) with this easy step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a flat surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Vehicle owner reminder for upcoming service
•No change in vehicle performance

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the trip meter reset knob to navigate to the 'Settings' or 'Maintenance' menu on the display.
3
Select the 'Maintenance Reset' option using the trip meter reset knob.
4
Confirm the reset by pressing and holding the trip meter reset knob until the maintenance light blinks and turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the trip meter reset knob to navigate to the 'Settings' or 'Maintenance' menu on the display.
3
Select the 'Maintenance Reset' option using the trip meter reset knob.
4
Confirm the reset by pressing and holding the trip meter reset knob until the maintenance light blinks and turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and in "Park" (for automatic transmission).
Have the vehicle's key fob or key available to access the ignition.

2. Ignition Position

Insert the key into the ignition or have the key fob inside the vehicle.
Turn the ignition switch to the "ON" position (do not start the engine).

Locate the trip meter reset knob, typically found near the speedometer.
Press the knob until you see the settings or maintenance menu on the display.

4. Reset Maintenance Light

Navigate to the "Maintenance Reset" option using the trip meter reset knob.
Press and hold the trip meter reset knob until the maintenance light blinks and turns off (usually takes about 10 seconds).
Release the knob and verify that the maintenance light is no longer illuminated.