how to reset the maintenance light on my Honda Pilot Third Generation (2016-present)?

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

330 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot Third Generation (2016-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and on a flat surface while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification of upcoming maintenance displayed
•Engine oil change reminder message
•Tire rotation reminder message

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the 'Menu' button on the steering wheel.
3
Use the arrow buttons to navigate to the 'Settings' menu.
4
Select 'Maintenance Info' from the settings options.
5
Choose 'Oil Life' or relevant maintenance item to reset.
6
Confirm the reset when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required; all actions performed via vehicle controls.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the 'Menu' button on the steering wheel.
3
Use the arrow buttons to navigate to the 'Settings' menu.
4
Select 'Maintenance Info' from the settings options.
5
Choose 'Oil Life' or relevant maintenance item to reset.
6
Confirm the reset when prompted.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in "ON" position without starting the engine.

Press the "Menu" button on the steering wheel.
Use the arrow keys to navigate to "Settings."
Select "Maintenance Info."

3. Reset the Maintenance Light

Choose "Oil Life" or the specific maintenance item you wish to reset.
Press and hold the "Enter" button until the display shows the reset confirmation.
Confirm the reset by selecting "Yes" when prompted.

4. Finalize

Turn off the ignition and then restart the vehicle to ensure the maintenance light is no longer illuminated.