how to reset the maintenance light on my Honda Pilot Third Generation (2016-present)?

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

333 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot Third Generation (2016-present) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode and the parking brake is engaged while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service displayed
•No other engine performance issues present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the odometer button to navigate to the 'Settings' menu on the dashboard display.
3
Select 'Maintenance Reset' option from the settings menu.
4
Confirm reset by pressing the 'Enter' or 'OK' button when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required, just the vehicle's ignition system.

Parts Required

•No parts required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in "ON" mode without starting the engine.

2. Access the Maintenance Settings

Turn the ignition to the "ON" position (the engine does not need to be running).
Locate the odometer button on the dashboard; this is typically found near the speedometer.

3. Navigate to Maintenance Reset

Press the odometer button until the maintenance menu appears.
Use the button to scroll through the options until "Maintenance Reset" is highlighted.

4. Execute the Reset

Press and hold the "Enter" or "OK" button until the display shows a confirmation message.
Release the button once the reset is complete and the maintenance light goes off.