how to reset the maintenance light on my Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

375 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot (2016-present) with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure position before attempting to reset the maintenance light.

Symptoms

•Maintenance light illuminated on the dashboard
•No change in vehicle performance
•No other warning lights present
•Potential reminder for oil change or other maintenance services

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip/reset button on the dashboard.
3
Turn the ignition off.
4
Press and hold the trip/reset button while turning the ignition back to the 'ON' position.
5
Continue holding the button until the maintenance light resets (usually a few seconds).

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver (if needed for accessing the trip/reset button)

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip/reset button on the dashboard.
3
Turn the ignition off.
4
Press and hold the trip/reset button while turning the ignition back to the 'ON' position.
5
Continue holding the button until the maintenance light resets (usually a few seconds).

Solution

1. Preparation

Gather necessary tools such as a flathead screwdriver (if needed for accessing the trip/reset button).
Ensure the vehicle is parked in a safe location.

2. Resetting the Maintenance Light

Turn on the Ignition:
- Insert the key and turn the ignition switch to the "ON" position without starting the engine.
Locate the Trip/Reset Button:
- Find the trip/reset button on the instrument panel (usually near the odometer).
Turn Off the Ignition:
- Switch the ignition back to the "OFF" position.
Reset Procedure:
- Press and hold the trip/reset button.
- While holding the button, turn the ignition back to the "ON" position.
Complete the Reset:
- Keep holding the button until the maintenance light turns off or blinks and then goes out (typically within 10 seconds).