how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

363 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this step-by-step guide. Simple instructions for quick maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing this reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No other operational issues present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button on the dashboard until the oil life percentage is displayed.
3
Press and hold the 'Select/Reset' button again for about 10 seconds until the oil life starts to blink.
4
Release the button, then press and hold it again until the oil life resets to 100%.
5
Verify that the maintenance light is turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button on the dashboard until the oil life percentage is displayed.
3
Press and hold the 'Select/Reset' button again for about 10 seconds until the oil life starts to blink.
4
Release the button, then press and hold it again until the oil life resets to 100%.
5
Verify that the maintenance light is turned off.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface.

2. Resetting the Maintenance Light

Turn on the Ignition
- Insert the key and turn the ignition to the "ON" position without starting the engine.
Access Oil Life Display
- Use the "Select/Reset" button on the dashboard to navigate through the menu until the oil life percentage is shown.
Initiate Reset Process
- Press and hold the "Select/Reset" button for about 10 seconds until the oil life percentage begins to blink.
Complete the Reset
- Release the "Select/Reset" button, then press and hold it again until the oil life resets to 100%. The maintenance light should turn off.

3. Confirmation

Turn off the ignition and then turn it back on to confirm that the maintenance light is no longer illuminated.