how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

392 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) after completing scheduled maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a level surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or other service displayed
•Warning message indicating service is due

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the 'Select/Reset' button on the instrument panel until the maintenance menu appears.
4
Use the 'Select/Reset' button to scroll to the 'Oil Life' or 'Maintenance Reset' option.
5
Hold the 'Select/Reset' button until the oil life resets to 100%.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the 'Select/Reset' button on the instrument panel until the maintenance menu appears.
4
Use the 'Select/Reset' button to scroll to the 'Oil Life' or 'Maintenance Reset' option.
5
Hold the 'Select/Reset' button until the oil life resets to 100%.

Solution

1. Preparation

Gather necessary tools: vehicle key, and ensure the vehicle is parked on a level surface.
Ensure the engine is off and the keys are out of the ignition.

Insert the key into the ignition and turn to the "ON" position (do not start the engine).
Wait for the dashboard lights to illuminate.

3. Reset Maintenance Light

Locate the "Select/Reset" button on the instrument panel.
Press the "Select/Reset" button repeatedly until the maintenance menu appears on the display.
Scroll to the "Oil Life" option using the same button.
Press and hold the "Select/Reset" button until the display shows "Reset." Release the button.
Confirm the reset by pressing and holding the "Select/Reset" button again until the oil life resets to 100%.

4. Finalize

Turn the ignition off and then back on to ensure the maintenance light is no longer illuminated.
Verify that the oil life percentage shows 100%.