how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

376 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notifications for oil change or service intervals
•Vehicle displays maintenance due message

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Menu' button on the dashboard display.
3
Use the selector knob to navigate to the 'Vehicle Settings' option.
4
Select 'Maintenance Info' from the menu.
5
Choose 'Oil Life' or the specific maintenance item to reset.
6
Follow the prompts to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this process.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Menu' button on the dashboard display.
3
Use the selector knob to navigate to the 'Vehicle Settings' option.
4
Select 'Maintenance Info' from the menu.
5
Choose 'Oil Life' or the specific maintenance item to reset.
6
Follow the prompts to confirm the reset.

Solution

1. Preparation

Ensure the vehicle is parked on a flat, level surface.
Have the vehicle in "ON" mode without starting the engine.

Turn the ignition switch to the "ON" position (do not start the engine).
Press the "Menu" button located on the dashboard display.

Use the selector knob or buttons to scroll to "Vehicle Settings."
Select "Maintenance Info" to enter the maintenance settings menu.

4. Resetting the Maintenance Light

Select "Oil Life" or the relevant maintenance item you wish to reset.
Confirm the reset by selecting the appropriate option (usually "Reset" or "OK").
Confirm any prompts to finalize the reset of the maintenance light.

5. Verifying the Reset

Turn the ignition off and then back on to check if the maintenance light is no longer illuminated.