how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

421 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No other driving issues or warning lights present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Access the vehicle's multi-information display using the controls on the steering wheel.
3
Navigate to the 'Settings' menu using the display controls.
4
Select 'Maintenance' from the settings options.
5
Choose 'Oil Life' or the specific maintenance item that needs resetting.
6
Confirm the reset action when prompted on the display.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Access the vehicle's multi-information display using the controls on the steering wheel.
3
Navigate to the 'Settings' menu using the display controls.
4
Select 'Maintenance' from the settings options.
5
Choose 'Oil Life' or the specific maintenance item that needs resetting.
6
Confirm the reset action when prompted on the display.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off all accessories (radio, lights, etc.) to avoid battery drain.

2. Turn on Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Alternatively, press the "Start" button without pressing the brake pedal if equipped with a keyless start.

3. Access Multi-Information Display

Locate the controls on the steering wheel that allow you to navigate the multi-information display.
Press the "Home" button if necessary to access the main menu.

4. Navigate to Maintenance Settings

Use the up/down arrows to scroll through the menu options.
Select "Settings" and press "Enter" or the appropriate button to confirm.

5. Reset Maintenance Light

Scroll to "Maintenance" and select it.
Choose "Oil Life" or the specific maintenance item that requires resetting.
Press and hold the "Enter" button until the confirmation message appears.
Confirm the reset when prompted.

6. Turn off Ignition

Turn the ignition switch to the "OFF" position.