how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

350 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the Multi-Information Display (MID)
•Possible service reminders for oil change or other maintenance tasks

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the steering wheel buttons to navigate to the 'Settings' menu on the MID.
3
Select 'Maintenance' from the options available.
4
Choose the specific maintenance item to reset (e.g., Oil Life).
5
Confirm the reset action when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the steering wheel buttons to navigate to the 'Settings' menu on the MID.
3
Select 'Maintenance' from the options available.
4
Choose the specific maintenance item to reset (e.g., Oil Life).
5
Confirm the reset action when prompted.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is parked safely with the ignition off.

Turn the ignition switch to the "ON" position (do not start the engine).
Locate the "Home" button on the steering wheel and press it to access the main menu.
Use the arrow buttons to scroll down to "Settings" and press "Enter."

3. Resetting the Maintenance Light

From the "Settings" menu, scroll to "Maintenance" and select it.
Choose the maintenance item you wish to reset (usually "Oil Life" or "A/B Service").
Press and hold the "Enter" button until the reset confirmation screen appears.
Confirm the reset by selecting "Yes" when prompted.

4. Finalizing

Turn the ignition off.
Start the engine to ensure the maintenance light is no longer illuminated.