how to reset the maintenance light on Honda Pilot Third Generation (2016-present)?

Honda Pilot Third Generation (2016-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the maintenance light on a Honda Pilot (2016-present) with this easy step-by-step guide. No tools required.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Notification for scheduled maintenance appears
•No other related performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position before starting the reset process.
2
Insert the key into the ignition without starting the engine.
3
Press the 'Gas' pedal three times within five seconds.
4
Turn the ignition to the 'On' position while keeping the gas pedal pressed.
5
Check if the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position before starting the reset process.
2
Insert the key into the ignition without starting the engine.
3
Press the 'Gas' pedal three times within five seconds.
4
Turn the ignition to the 'On' position while keeping the gas pedal pressed.
5
Check if the maintenance light blinks and then turns off.

Solution

1. Preparation

Gather the necessary tools: None required for this procedure.
Ensure the vehicle is parked safely with the ignition off.

2. Ignition Setup

Insert the key into the ignition.
Do not start the engine; the key should be in the "Off" position.

3. Gas Pedal Action

Press the "Gas" pedal three times rapidly within five seconds.
This action signals the vehicle's system to prepare for the reset.

4. Turn Ignition On

With the gas pedal pressed, turn the ignition key to the "On" position (do not start the engine).
Hold the gas pedal down until you see the maintenance light blink.

5. Confirm Reset

Release the gas pedal and turn the ignition back to the "Off" position.
Start the engine to confirm that the maintenance light has been reset and is no longer illuminated.