how to reset the maintenance light on a Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

326 words

Problem Statement

Learn how to reset the maintenance light on a Honda Pilot YF3 (2016-2022) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Vehicle maintenance has recently been performed (oil change, tire rotation, etc.)
•No other warning lights are present

Diagnostic Steps

1
Ensure the vehicle is turned off and the keys are removed from the ignition.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (in keyless models).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'On' position while keeping the gas pedal pressed.
5
Wait for the maintenance light to blink and turn off, then release the gas pedal.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and the keys are removed from the ignition.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (in keyless models).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'On' position while keeping the gas pedal pressed.
5
Wait for the maintenance light to blink and turn off, then release the gas pedal.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is in a safe location, preferably in a garage or parking lot.

2. Resetting the Maintenance Light

Insert the key into the ignition or press the start button without pressing the brake pedal.
Press the gas pedal three times quickly within a five-second interval.
Turn the ignition to the "On" position without starting the engine (if using a key, don’t turn to "Start").
Observe the maintenance light; it should blink and then turn off.
Release the gas pedal to complete the reset process.