how to reset the maintenance light in my Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

375 words

Problem Statement

Learn how to reset the maintenance light in your Honda Pilot (2016-present). Step-by-step guide for a quick and easy reset process.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe parking position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Service reminder alert displayed on the instrument cluster
•No other engine performance issues present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button on the dashboard until the engine oil life indicator is displayed.
3
Hold the 'Select/Reset' button for about 10 seconds until the oil life indicator starts to blink.
4
Release the 'Select/Reset' button and then press it again until the oil life resets to 100%.
5
Turn off the ignition and then turn it back on to verify that the maintenance light is no longer illuminated.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button on the dashboard until the engine oil life indicator is displayed.
3
Hold the 'Select/Reset' button for about 10 seconds until the oil life indicator starts to blink.
4
Release the 'Select/Reset' button and then press it again until the oil life resets to 100%.
5
Turn off the ignition and then turn it back on to verify that the maintenance light is no longer illuminated.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the ignition is turned off.
Have the vehicle keys ready to turn the ignition on.

2. Ignition Positioning

Insert the key into the ignition.
Turn the ignition switch to the "ON" position without starting the engine.

3. Resetting the Oil Life

Press the "Select/Reset" button on the dashboard repeatedly until the oil life indicator is displayed.
Hold down the "Select/Reset" button for approximately 10 seconds until the oil life indicator begins to blink.

4. Finalizing the Reset

Release the "Select/Reset" button.
Press and hold the button again until the oil life resets to 100%.
Turn off the ignition.

5. Verification

Turn the ignition back on.
Confirm that the maintenance light is extinguished and the oil life displays 100%.