how to reset maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) after an oil change. Step-by-step guide for quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification for scheduled maintenance displayed on the screen
•No change in vehicle performance or operation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition or press the Start button without pressing the brake pedal.
3
Press the gas pedal three times within ten seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Check the maintenance light on the dashboard to confirm it has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key or remote

Parts Required

•None required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition or press the Start button without pressing the brake pedal.
3
Press the gas pedal three times within ten seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Check the maintenance light on the dashboard to confirm it has turned off.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Have the vehicle key or remote ready.

2. Access Ignition

Insert the key into the ignition or press the Start button without pressing the brake pedal.

3. Perform Reset Procedure

Press Gas Pedal
- Press and release the gas pedal three times within ten seconds.
- Ensure you do this quickly and consistently.
Turn Ignition On
- Turn the ignition switch to the "On" position without starting the engine.
- All dashboard lights, including the maintenance light, will illuminate.
Check Maintenance Light
- Observe the maintenance light; it should turn off after a few seconds.
- If it remains illuminated, repeat the steps.