FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the P0171 code on my Honda Pilot Third Generation (2016-present) - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/how to fix the P0171 code on my Honda Pilot Third Generation (2016-present)

how to fix the P0171 code on my Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0171
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
530 words

Problem Statement

Learn how to diagnose and fix P0171 engine lean condition in Honda Pilot. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0171
Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any repairs.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or stalling
  • •Decreased fuel efficiency
  • •Engine hesitation during acceleration
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Screwdrivers and socket set
  • •MAF cleaner spray
  • •Mechanic's stethoscope or listening tool

Parts Required

  • •Air intake duct (if damaged)
  • •Vacuum hoses (if cracked)
  • •Fuel filter (if clogged)
  • •Fuel injectors (if faulty)

Additional Information

Error Code
P0171
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather required tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery cable for safety.
2. Inspect and Repair Air Intake System
  • Sub-steps:
    1. Remove the air intake duct to access the throttle body and MAF sensor.
    2. Inspect the duct for cracks or loose fittings; replace as necessary.
    3. Clean the MAF sensor using MAF cleaner spray (do not touch the sensor element).
3. Check Fuel Pressure
  • Sub-steps:
    1. Connect the fuel pressure gauge to the fuel rail service port.
    2. Turn the ignition key to the ON position (do not start) to build pressure.
    3. Verify that the fuel pressure reads within the manufacturer's specifications (typically 40-50 psi).
    4. If pressure is low, inspect the fuel pump, fuel filter, and fuel lines for issues.
4. Inspect Vacuum Hoses
  • Sub-steps:
    1. Trace all vacuum hoses connected to the intake manifold.
    2. Look for any signs of wear, cracks, or disconnections.
    3. Replace any damaged hoses with new ones and ensure all connections are tight.
5. Inspect and Test Fuel Injectors
  • Sub-steps:
    1. With the engine running, use a stethoscope or a mechanic's tool to listen to each fuel injector for a clicking sound.
    2. If an injector is not functioning, remove and test it using a bench tester.
    3. Replace any faulty injectors with OEM components.