how to fix the jerking when shifting gears in my Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

596 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix jerking during gear shifts in Honda Pilot YF3 (2016-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before checking or changing transmission fluid.

Symptoms

•Jerking or lurching sensation when shifting gears
•Delayed engagement when shifting from park to drive or reverse
•Unusual noises during gear changes (clunking or grinding)
•Check engine light illuminated
•Poor acceleration response

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner for any error codes related to transmission performance.
2
Check the transmission fluid level and condition; ensure it is at the correct level and not burnt or contaminated.
3
Inspect the transmission fluid cooler for leaks or blockages.
4
Examine the transmission mounts for wear or damage.
5
Test the throttle position sensor (TPS) to ensure it is functioning correctly.
6
Verify the operation of the transmission control module (TCM) and its connections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fluid pump
•Transmission fluid
•Multimeter

Parts Required

•Honda ATF DW-1 transmission fluid
•Throttle position sensor (if replacement is necessary)
•Transmission mounts (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner for any error codes related to transmission performance.
2
Check the transmission fluid level and condition; ensure it is at the correct level and not burnt or contaminated.
3
Inspect the transmission fluid cooler for leaks or blockages.
4
Examine the transmission mounts for wear or damage.
5
Test the throttle position sensor (TPS) to ensure it is functioning correctly.
6
Verify the operation of the transmission control module (TCM) and its connections.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, torque wrench, fluid pump, transmission fluid, replacement parts as needed.
Ensure the vehicle is parked on a level surface and the engine is turned off. Disconnect the battery for safety.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Use the fluid pump to extract the old transmission fluid from the pan through the dipstick tube.
3. Inspect the fluid for color and smell; if it appears dark or burnt, it’s time for a change.
4. Replace with the manufacturer-recommended transmission fluid (Honda ATF DW-1).
5. Reinsert the dipstick and check the level; add more fluid if necessary.

3. Inspect and Replace Transmission Mounts (if needed)

Sub-steps:
1. Use a socket set to remove the bolts securing the transmission mounts.
2. Examine mounts for cracks or excessive wear; if damaged, replace with new mounts.
3. Position the new mounts and tighten the bolts to the manufacturer's specified torque.

4. Throttle Position Sensor (TPS) Testing and Replacement

Sub-steps:
1. Locate the TPS on the throttle body and disconnect the electrical connector.
2. Use a multimeter to test the TPS resistance while moving the throttle plate.
3. If the readings are outside specifications or inconsistent, replace the TPS.
4. Reconnect the new TPS and ensure it's properly calibrated.

5. Transmission Control Module (TCM) Inspection

Sub-steps:
1. Locate the TCM, usually found near the transmission or under the dashboard.
2. Inspect the wiring harness and connectors for signs of corrosion or damage.
3. If issues are found, repair or replace the wiring/connector as needed.