how do I reset the maintenance light on my Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

394 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot YF3 (2016-2022) with this step-by-step guide. Ensure your vehicle's maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface when performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Driver may be unsure if maintenance was performed
•Vehicle may not indicate service intervals correctly

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' knob on the instrument panel to navigate to the 'Settings' menu.
3
Scroll to the 'Maintenance' section using the knob and select it.
4
Choose the maintenance item you wish to reset (e.g., Oil Life).
5
Confirm the reset by following the on-screen prompts.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None needed for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' knob on the instrument panel to navigate to the 'Settings' menu.
3
Scroll to the 'Maintenance' section using the knob and select it.
4
Choose the maintenance item you wish to reset (e.g., Oil Life).
5
Confirm the reset by following the on-screen prompts.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather necessary tools: none required, just the vehicle key.

2. Accessing the Ignition

Insert the key into the ignition or ensure the smart key is inside the vehicle.
Turn the ignition switch to the "ON" position without starting the engine.

3. Navigating to Maintenance Reset

Locate the "Select/Reset" knob on the instrument panel.
Press the knob until the "Settings" menu appears on the display.

4. Resetting the Maintenance Light

Use the knob to scroll to the "Maintenance" option and press to select.
Choose the specific maintenance reminder to reset (e.g., "Oil Life").
Follow the prompts on the screen to confirm the reset by selecting "Yes."

5. Finalizing the Reset

Turn the ignition off and then back on to verify that the maintenance light is no longer illuminated.