how do I reset my Honda Pilot Third Generation (2016-present) maintenance light?

Honda Pilot Third Generation (2016-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot Third Generation (2016-present) after routine maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•Vehicle has recently undergone maintenance (oil change, filter replacement, etc.)

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Press the 'Menu' button on the steering wheel to access the vehicle’s settings.
4
Use the arrow keys to navigate to 'Maintenance Info' or 'Vehicle Settings.'
5
Select 'Oil Life' or the specific maintenance item that needs resetting.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Press the 'Menu' button on the steering wheel to access the vehicle’s settings.
4
Use the arrow keys to navigate to 'Maintenance Info' or 'Vehicle Settings.'
5
Select 'Oil Life' or the specific maintenance item that needs resetting.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the ignition off.
Have the vehicle's owner's manual on hand for reference if needed.

2. Access Maintenance Reset

Turn the ignition to the "ON" position (do not start the engine).
Press the "Menu" button on the steering wheel.
Navigate to "Vehicle Settings" using the arrow buttons.
Select "Maintenance Info" from the list displayed on the screen.

3. Reset Maintenance Light

Once in "Maintenance Info," choose "Oil Life" or the relevant maintenance item.
Press and hold the "Enter" button until a confirmation message appears.
Select "Reset" to confirm the reset of the maintenance light.

4. Confirm Reset

Turn the ignition off and then back on to check if the maintenance light is off.
If the light remains on, repeat the steps to ensure the reset was completed correctly.