Honda Pilot Third Generation (2016-present) power windows stopped working, what could be wrong?

Honda Pilot Third Generation (2016-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

526 words

Problem Statement

Learn how to diagnose and fix power window issues in Honda Pilot Third Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits.

Symptoms

•Power windows do not respond when the switch is pressed
•No sound from the window motor when attempting to operate windows
•Driver's side window operates while passenger windows do not
•Check for any blown fuses related to the power windows
•Intermittent operation of windows before complete failure

Diagnostic Steps

1
Check the power window fuse in the fuse box for any signs of a blown fuse.
2
Use an OBD-II scanner to check for any related error codes that may provide insight into electrical issues.
3
Inspect the power window switches for any visible damage or corrosion.
4
Test the power window motor by applying direct battery voltage to it.
5
Examine the wiring harness for any signs of wear, damage, or loose connections.
6
Check the window regulator for mechanical binding or failure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdrivers (flathead and Phillips)
•Socket set
•Trim removal tools

Parts Required

•Power window fuse (if blown)
•Window switch (if faulty)
•Window motor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Power windows do not respond when the switch is pressed

•No sound from the window motor when attempting to operate windows

•Driver's side window operates while passenger windows do not

•Check for any blown fuses related to the power windows

•Intermittent operation of windows before complete failure

Diagnostic Steps

1
Check the power window fuse in the fuse box for any signs of a blown fuse.
2
Use an OBD-II scanner to check for any related error codes that may provide insight into electrical issues.
3
Inspect the power window switches for any visible damage or corrosion.
4
Test the power window motor by applying direct battery voltage to it.
5
Examine the wiring harness for any signs of wear, damage, or loose connections.
6
Check the window regulator for mechanical binding or failure.

Solution

1. Preparation

Gather the necessary tools and parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect and Replace the Fuse

Locate the fuse box (typically found under the dashboard or in the engine compartment).
Remove the cover and identify the power window fuse (refer to the fuse diagram).
If the fuse is blown, replace it with a fuse of the same amperage (usually 30A).
Reconnect the battery and test the windows.

3. Test and Replace the Window Switch

If the fuse is intact, remove the door panel to access the window switch.
Disconnect the switch harness and use a multimeter to check for continuity.
If faulty, replace the switch with a new one.
Reassemble the door panel.

4. Inspect and Replace the Window Motor

If the switch is functional, disconnect the wiring harness from the window motor.
Test the motor by applying direct voltage from a battery (observe polarity).
If the motor does not operate, replace it with a new motor.
Reassemble the door panel after installation.

5. Check and Repair Wiring

If the motor operates, inspect the wiring harness for damage.
Repair or replace any damaged wires and ensure all connections are secure.
Reconnect the battery and test the power windows again.