FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Honda Pilot Third Generation (2016-present) parking brake light stays on what to check - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/Honda Pilot Third Generation (2016-present) parking brake light stays on what to check

Honda Pilot Third Generation (2016-present) parking brake light stays on what to check

Honda Pilot Third Generation (2016-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
522 words

Problem Statement

Learn how to diagnose and fix the parking brake light issue in Honda Pilot (2016-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Always support the vehicle securely with jack stands when working underneath.

Symptoms

  • •Parking brake light illuminated on the dashboard
  • •Parking brake lever feels loose or does not fully engage
  • •Vehicle rolls when parked on an incline
  • •Brake fluid level low warning may also appear
  • •Unusual noises when attempting to apply or release the parking brake

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Brake fluid (DOT 3 or DOT 4)
  • •Jack and jack stands

Parts Required

  • •Parking brake switch (if faulty)
  • •Parking brake cables (if damaged)

Additional Information

Affected Component
Brakes
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Ensure the vehicle is parked on a level surface and engage the wheel chocks for safety.
  • Disconnect the negative battery terminal to prevent any electrical short circuits.
2. Brake Fluid Level Check
  • Remove the brake fluid reservoir cap.
  • Inspect the fluid level; if low, top off with the recommended brake fluid (DOT 3 or DOT 4 as specified in the owner's manual).
  • Replace the cap securely and reconnect the battery terminal.
3. Inspect Parking Brake Switch
  • Locate the parking brake switch, typically found near the parking brake lever.
  • Remove the switch connector and use a multimeter to test for continuity when the parking brake is applied and released.
  • If the switch is faulty, replace it with a new one.
4. Check Parking Brake Cables
  • Raise the vehicle using a jack and secure it with jack stands.
  • Inspect the parking brake cables for any signs of fraying, corrosion, or physical damage.
  • If damaged, replace the cables with OEM parts.
5. Test Parking Brake Functionality
  • After replacing any faulty components, reassemble any removed parts.
  • Ensure the parking brake lever is properly adjusted and engages fully.
  • Test the parking brake by applying it and making sure the light turns off.