Honda Pilot Third Generation (2016-present) check engine light P0700, what does it mean?

Honda Pilot Third Generation (2016-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

511 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Honda Pilot. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission fluid pan.

Symptoms

•Check engine light illuminated
•Transmission slipping or harsh shifting
•Poor acceleration or loss of power
•Unusual noises from the transmission
•Delayed engagement when shifting into gear

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve additional transmission-related codes.
2
Inspect the transmission fluid level and condition (color and smell).
3
Check for any visible leaks around the transmission and associated components.
4
Inspect the transmission wiring harness and connectors for damage or corrosion.
5
Test the transmission control module (TCM) for proper operation using a multimeter.
6
Review the vehicle's service history for any previous transmission repairs or maintenance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Jack and jack stands

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Gasket for transmission pan
•Transmission control module (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve additional transmission-related codes.
2
Inspect the transmission fluid level and condition (color and smell).
3
Check for any visible leaks around the transmission and associated components.
4
Inspect the transmission wiring harness and connectors for damage or corrosion.
5
Test the transmission control module (TCM) for proper operation using a multimeter.
6
Review the vehicle's service history for any previous transmission repairs or maintenance.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Transmission Fluid

Sub-steps:
1. Raise the vehicle using a jack and secure it on jack stands.
2. Remove the transmission fluid pan (if applicable) and drain old fluid into a suitable container.
3. Inspect the fluid for debris or metal shavings, indicating internal wear.
4. Replace the transmission filter if applicable.
5. Reinstall the pan with a new gasket, ensuring to torque the bolts to the manufacturer’s specifications.
6. Refill the transmission with fresh fluid (check owner's manual for the specified type and capacity).

3. Repair or Replace Wiring and Connectors

Sub-steps:
1. Examine the wiring harness for any signs of fraying, corrosion, or disconnection.
2. Repair any damaged wiring using appropriate electrical connectors or heat-shrink tubing.
3. Replace any faulty connectors to ensure a solid electrical connection.

4. Reprogram or Replace the TCM (if necessary)

Sub-steps:
1. If the TCM is found to be faulty, disconnect the battery and remove the module.
2. Replace with a new or refurbished TCM, ensuring compatibility with the vehicle model.
3. Reconnect the battery and perform necessary programming or calibration as per manufacturer instructions.

5. Final Steps

Reconnect the negative battery terminal.
Start the vehicle and check for the check engine light status.