why does my Honda CR-V Fifth Generation (2017-2022) shake while braking

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

530 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure brake line is not under tension while supporting the caliper.
•Always disconnect the battery before working on the braking system if any electrical components are involved.
•Allow the brakes to cool before performing any inspection or repair.

Symptoms

•Steering wheel vibrates while braking
•Vehicle sways or shakes side to side during braking
•Uneven brake pedal feel
•Increased stopping distance
•Brake warning light may illuminate

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and uneven wear.
3
Examine suspension components, such as control arms and bushings, for damage or wear.
4
Review wheel alignment and balance.
5
Scan the vehicle for any error codes that may indicate brake system issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench

Parts Required

•Brake rotors
•Brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Wear safety goggles and gloves.

2. Lift the Vehicle

Sub-steps:
1. Use a jack to lift the front of the vehicle.
2. Secure the vehicle with jack stands.
Tools Required: Hydraulic jack, jack stands

3. Remove the Wheels

Sub-steps:
1. Use a lug wrench to loosen and remove the lug nuts.
2. Take off the front wheels to access the brake components.
Tools Required: Lug wrench

4. Inspect and Replace Brake Rotors

Sub-steps:
1. Visually inspect the brake rotors for signs of warping or scoring.
2. If warped, remove the caliper by unbolting it from the bracket; support it with a bungee cord to avoid straining the brake line.
3. Remove the rotor by unscrewing the retaining screws (if applicable) and sliding it off the hub.
4. Install new rotors, ensuring they are clean and properly seated.
Tools Required: Socket set, bungee cord
Safety Warnings: Ensure brake line is not under tension while supporting the caliper.

5. Inspect and Replace Brake Pads

Sub-steps:
1. Check the brake pads for thickness; replace if less than 3mm.
2. Remove the old pads and install new pads, ensuring they are properly aligned.
Tools Required: Socket set

6. Reassemble and Lower the Vehicle

Sub-steps:
1. Reattach the calipers and ensure all bolts are torqued to manufacturer specifications.
2. Reinstall the wheels and hand-tighten the lug nuts.
3. Lower the vehicle and torque the lug nuts to the specified value.
Tools Required: Torque wrench
Safety Warnings: Ensure the vehicle is stable before lowering.