why does my Honda CR-V Fifth Generation (2017-2022) shake when I brake?

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

554 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on brake systems.
•Allow the vehicle to cool down before touching any components that may have heated up during driving.

Symptoms

•Shaking or vibrating sensation in the steering wheel or chassis when braking
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Potential noise (squeaking or grinding) when braking
•Vibration persists at various speeds, not just during braking

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for thickness and even wear; replace if below minimum specification.
3
Examine suspension components for wear, including control arms, bushings, and wheel bearings.
4
Perform a visual inspection of the brake calipers to ensure they are functioning properly.
5
Test drive the vehicle to confirm the vibration occurs during braking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Torque wrench
•Dial indicator
•Brake cleaner
•Basic hand tools (sockets, ratchets)

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)
•Brake caliper (if malfunctioning)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for thickness and even wear; replace if below minimum specification.
3
Examine suspension components for wear, including control arms, bushings, and wheel bearings.
4
Perform a visual inspection of the brake calipers to ensure they are functioning properly.
5
Test drive the vehicle to confirm the vibration occurs during braking.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat surface and securely lift it using a jack.
Disconnect the battery (if applicable for electronic brake systems).

2. Remove Wheel

Use a lug wrench to loosen the lug nuts on the affected wheel.
Lift the vehicle and secure it on jack stands.
Fully remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Inspect Brake Rotors:
- Use a dial indicator to check for warping. If warped beyond specifications, replace the rotors.
- Clean the rotor surface with brake cleaner.
Check Brake Pads:
- Measure the thickness of the brake pads. If they are worn below 3mm, replace them.
- Ensure the pads are seated correctly in the caliper.
Inspect Calipers:
- Check for sticking calipers; if the piston does not move freely, replace the caliper.
Examine Suspension:
- Look for wear in bushings and bearings. Replace any worn components.

4. Reassemble and Torque Components

Reinstall the brake components and ensure all bolts are torqued to the manufacturer specifications.
Place the wheel back on and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the specified value (usually around 80-100 ft-lbs).

5. Final Checks

Reconnect the battery (if it was disconnected).
Test the brake system by applying the brakes gently to ensure everything is functioning correctly.