why does my Honda CR-V Fifth Generation (2017-2022) shake when I brake

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

579 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking issues when braking in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on any electrical components.
•Allow brakes to cool before inspection to avoid burns.

Symptoms

•Steering wheel vibrates during braking
•Brake pedal pulsates or feels uneven
•Vehicle pulls to one side when braking
•Increased stopping distance
•Noise coming from the brakes (squeaking or grinding)

Diagnostic Steps

1
Inspect brake pads for wear and tear using a visual inspection.
2
Check brake rotors for warpage using a dial indicator or straightedge.
3
Examine suspension components such as control arms and bushings for damage.
4
Verify wheel alignment and balance by checking with alignment equipment.
5
Check tire condition for uneven wear patterns that can affect braking.
6
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake caliper tool
•OBD-II scanner
•Jack
•Jack stands

Parts Required

•Brake pads
•Brake rotors (if warped)
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and tear using a visual inspection.
2
Check brake rotors for warpage using a dial indicator or straightedge.
3
Examine suspension components such as control arms and bushings for damage.
4
Verify wheel alignment and balance by checking with alignment equipment.
5
Check tire condition for uneven wear patterns that can affect braking.
6
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

1. Preparation

Gather required tools and parts.
Ensure the vehicle is parked on a flat surface, and engage the parking brake.
Wear safety glasses and gloves for protection.

2. Remove Wheel

Tools Required: Socket set, torque wrench
Loosen the lug nuts slightly while the vehicle is on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Completely remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Pads

Check the thickness of the brake pads; they should be no less than 3mm.
If replacement is necessary:
- Sub-steps:
  1. Remove the caliper bolts using a socket wrench.
  2. Slide the caliper off the rotor and support it with a bungee cord to avoid straining the brake line.
  3. Remove the old brake pads from the caliper bracket.
  4. Install new brake pads, ensuring they are correctly oriented.
  5. Compress the caliper piston using a brake caliper tool to fit over the new pads.
  6. Reinstall the caliper and tighten bolts to the manufacturer's torque specification (typically around 25-30 ft-lbs).

4. Inspect and Resurface/Replace Brake Rotors

Check rotors for thickness and warpage.
If warped:
- Sub-steps:
  1. Remove the caliper bracket by unscrewing its bolts.
  2. Slide off the rotor from the hub.
  3. If resurfacing, take to a machine shop; otherwise, replace with new rotors.
  4. Install new rotors and secure with the proper torque specification (typically around 80-100 ft-lbs for rotor bolts).

5. Reassemble Wheel and Lower Vehicle

Place the wheel back onto the hub.
Hand-tighten the lug nuts, then lower the vehicle to the ground.
Tighten the lug nuts in a crisscross pattern to the manufacturer's torque specification (typically around 80-100 ft-lbs).