why does my Honda CR-V Fifth Generation (2017-2022) shake when I accelerate

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

519 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when the vehicle is lifted to prevent accidents.
•Ensure the vehicle is in a stable position before starting any work.

Symptoms

•Vehicle shakes or vibrates when accelerating
•Steering wheel may shake or feel unsteady
•Vibration may increase with speed
•Possible noise from the engine or drivetrain
•Decreased fuel efficiency
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of suspension components for any signs of wear or damage.
3
Use an OBD-II scanner to check for any stored error codes that may indicate engine or transmission issues.
4
Check engine and transmission mounts for signs of wear or failure.
5
Inspect the drivetrain, including the driveshaft and CV joints, for any signs of damage or excessive play.
6
Test drive the vehicle to replicate the shaking and note specific conditions under which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Wheel chocks
•Jack stands
•Torque wrench
•Tire pressure gauge
•OBD-II scanner

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•Engine and transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of suspension components for any signs of wear or damage.
3
Use an OBD-II scanner to check for any stored error codes that may indicate engine or transmission issues.
4
Check engine and transmission mounts for signs of wear or failure.
5
Inspect the drivetrain, including the driveshaft and CV joints, for any signs of damage or excessive play.
6
Test drive the vehicle to replicate the shaking and note specific conditions under which it occurs.

Solution

1. Preparation

Tools Required: Wheel chocks, jack stands, torque wrench, tire pressure gauge, OBD-II scanner.
Ensure the vehicle is parked on a level surface and engage the parking brake.

2. Tire Inspection and Replacement

Sub-steps:
1. Check tire pressure using a tire pressure gauge and inflate to the recommended PSI.
2. Inspect each tire for uneven wear or visible damage; replace if necessary.
3. Rotate tires if uneven wear is found, following the vehicle's recommended tire rotation pattern.

3. Suspension Component Inspection

Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Visually inspect the control arms, bushings, and struts for wear or damage.
3. Replace any worn or damaged suspension components, ensuring proper alignment afterward.

4. Drivetrain Inspection

Sub-steps:
1. Inspect the driveshaft for any signs of damage or excessive play.
2. Check CV joints for tearing or leaking grease; replace if damaged.
3. Tighten any loose bolts in the drivetrain assembly to the manufacturer’s torque specifications.

5. Mount Inspection and Replacement

Sub-steps:
1. Inspect engine and transmission mounts for cracks or deterioration.
2. If mounts are damaged, remove the old mounts using appropriate tools (sockets and wrenches).
3. Install new mounts, ensuring they are torqued to specifications.