why does my Honda CR-V Fifth Generation (2017-2022) shake when braking

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

472 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Allow the brake components to cool before touching them.

Symptoms

•Shaking or vibrations felt in the steering wheel when braking
•Pulsating brake pedal
•Increased stopping distance
•Uneven wear on brake pads or rotors
•Possible noise from the brake area (squeaking or grinding)

Diagnostic Steps

1
Inspect the brake rotors for warping using a dial indicator.
2
Check brake pad thickness and condition for uneven wear.
3
Examine suspension components (e.g., control arms, tie rods) for wear or damage.
4
Verify brake fluid level and condition.
5
Perform a wheel alignment check for proper adjustment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Dial indicator
•Torque wrench
•Brake cleaner

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools: jack, jack stands, lug wrench, dial indicator, torque wrench, and brake cleaner.
Ensure the vehicle is parked on a level surface with the engine off and the parking brake engaged.

2. Remove Wheel

Using a lug wrench, loosen the lug nuts on the affected wheel.
Raise the vehicle with a jack and secure it on jack stands.
Completely remove the lug nuts and take off the wheel.

3. Inspect Brake Rotors

Use a dial indicator to measure the runout of the brake rotor.
- Sub-step: Rotate the rotor and check for any variation in thickness.
- If warping is detected (typically more than 0.002 inches), plan to replace the rotors.

4. Inspect Brake Pads

Check the brake pads for thickness.
- Sub-step: If pads are worn unevenly or below the manufacturer’s minimum thickness (usually around 3 mm), replace them.

5. Reassemble Components

If rotors and pads are in good condition, reinstall the wheel.
- Sub-step: Hand-tighten the lug nuts and lower the vehicle.
- Sub-step: Torque the lug nuts to the manufacturer's specifications (usually around 80-100 ft-lbs).

6. Final Inspection

After repairs, check the brake fluid level and top off if necessary.
Test the brakes at low speed in a safe area to ensure proper function.