why does my Honda CR-V Fifth Generation (2017-2022) make a grinding noise when turning?

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

529 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported on jack stands before working underneath.

Symptoms

•Grinding noise when making turns
•Possible vibration in the steering wheel
•Increased steering effort
•Uneven tire wear
•Clunking or popping noises during turns

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any audible noises from the wheel bearings while rotating the wheels.
3
Examine the CV joints for any signs of damage or excessive play.
4
Inspect the brake components for wear or misalignment.
5
Evaluate the suspension components, such as struts and control arms, for any signs of wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Screwdrivers

Parts Required

•Honda Genuine Power Steering Fluid
•CV axle (if necessary)
•Brake pads and rotors (if necessary)
•Struts or control arms (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any audible noises from the wheel bearings while rotating the wheels.
3
Examine the CV joints for any signs of damage or excessive play.
4
Inspect the brake components for wear or misalignment.
5
Evaluate the suspension components, such as struts and control arms, for any signs of wear or damage.

Solution

1. Preparation

Gather tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to ensure safety.

2. Inspect Power Steering System

Check the power steering fluid reservoir.
- If low, refill with Honda Genuine Power Steering Fluid.
- If fluid is dark or contaminated, consider flushing the system.

3. CV Joint Inspection and Replacement

Raise the vehicle using a jack and secure it on jack stands.
Remove the front wheels using a socket set.
Inspect the CV boots for tears or leaks.
- If damaged, replace the entire CV axle.
- To replace, remove the axle nut and unbolt the CV joint from the steering knuckle.
- Install the new axle in reverse order, torque the axle nut to manufacturer specifications (typically around 150 lb-ft).

4. Brake Component Check

Inspect brake pads and rotors for wear.
- If worn, replace brake pads and resurfacing or replacing rotors as necessary.
- Ensure calipers are properly aligned and secured.

5. Suspension Component Inspection and Repair

Check struts for leaks and ensure they are functioning properly.
- If damaged, replace the struts, ensuring to torque the mounting bolts to specified values (usually around 40 lb-ft).
Inspect control arms for any damage or excessive play.
- Replace any worn bushings or control arms as necessary.