why does my Honda CR-V display a "Maintenance Required" message

Honda CR-V Sixth Generation (2023-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

454 words

Problem Statement

Learn how to resolve the "Maintenance Required" message on your Honda CR-V. Step-by-step guide for maintenance tasks and resetting the light.

Affected Component

Engine

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before performing maintenance tasks.
•Always dispose of old oil and filters in accordance with local regulations.

Symptoms

•"Maintenance Required" message illuminated on the dashboard
•Service indicator light is on
•Possible changes in engine performance
•Owner’s manual recommends maintenance services at this interval

Diagnostic Steps

1
Check the vehicle's maintenance schedule in the owner’s manual.
2
Inspect the odometer reading to verify if it has reached the mileage interval for maintenance.
3
Confirm if any maintenance services (e.g., oil change, filter replacement) are due based on time or mileage.
4
Verify if the maintenance reminder needs to be reset after servicing.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Oil filter wrench
•Screwdriver
•OBD-II scanner

Parts Required

•Engine oil
•Oil filter
•Air filter
•Various fluids (coolant, brake fluid, etc.)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle's maintenance schedule in the owner’s manual.
2
Inspect the odometer reading to verify if it has reached the mileage interval for maintenance.
3
Confirm if any maintenance services (e.g., oil change, filter replacement) are due based on time or mileage.
4
Verify if the maintenance reminder needs to be reset after servicing.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery for safety if needed (this is optional for a reset).

2. Perform Required Maintenance

Oil Change
- Drain old engine oil using a socket set to remove the drain plug.
- Replace oil filter with a new one using an oil filter wrench.
- Refill engine with the recommended type and amount of oil (usually 0W-20 for Honda CR-V).
Check Fluid Levels
- Inspect and top off other fluids (coolant, brake fluid, transmission fluid, and windshield washer fluid) as necessary.
Inspect Brakes and Tires
- Visually check brake pads for wear and ensure tires are properly inflated and have adequate tread.
Replace Air Filter
- Remove the air filter housing cover using a screwdriver or socket set.
- Replace with a new air filter.

3. Reset Maintenance Light

Turn the ignition to the "ON" position without starting the engine.
Press the gas pedal three times within 10 seconds.
Turn the ignition off, then back to the "ON" position to confirm the reset.