my Honda CR-V's rear brakes are making a squeaking sound what should I do

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a flat surface, engage the parking brake, and use wheel chocks.
• Loosen the lug nuts on the rear wheels before lifting the vehicle.

2. Lift the Vehicle

• Use a hydraulic jack to lift the rear of the vehicle.
• Secure with jack stands for safety.

3. Remove Rear Wheels

• Fully remove the lug nuts and take off the rear wheels.

4. Inspect and Remove Brake Components

• Remove the caliper bolts using an appropriate socket.
• Carefully slide the caliper off the brake rotor and suspend it using a bungee cord to avoid stress on the brake line.
• Remove the brake pads by sliding them out from the caliper bracket.
• Inspect the rotor for wear and replace if necessary.

5. Replace Brake Pads

• If pads are worn, install new brake pads ensuring they are oriented correctly.
• Apply brake grease to the back of the pads and any contact points to prevent squeaking.

6. Reassemble Components

• Reattach the caliper over the new brake pads and tighten the caliper bolts to the manufacturer's torque specifications (typically around 20-25 lb-ft).
• Reinstall the wheels and torque the lug nuts to the manufacturer’s specifications.

7. Lower the Vehicle

• Carefully remove the jack stands and lower the vehicle back to the ground.

8. Test the Brakes

• Pump the brake pedal several times to ensure proper function before driving.

Tools Required:

• Socket set
• Torque wrench
• Brake cleaner
• Bungee cord
• Micrometer or caliper (for measuring pad thickness)

Parts Required:

• New rear brake pads
• Brake grease
• (If needed) New brake rotors

Estimated Repair Time: 2-4 hours

Safety Warnings:

• Always wear safety goggles and gloves when working on brakes.
• Ensure the vehicle is securely lifted and supported before working underneath.