how to resolve Honda CR-V Fifth Generation (2017-2022) window not working issue

Honda CR-V Sixth Generation (2023-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

501 words

Problem Statement

Learn how to diagnose and fix the window not working issue in Honda CR-V (2017-2022). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems to avoid short circuits.
•Allow vehicle to cool before working on any components.

Symptoms

•Power window switches do not respond when pressed
•Windows are completely unresponsive
•Clicking noise when pressing the window switch (indicating motor engagement)
•Driver's side master switch not functioning for any window
•Individual window switches work intermittently
•Window operates slowly or only partially opens/closes

Diagnostic Steps

1
Inspect the window fuse for continuity using a multimeter.
2
Test the power window switch for proper operation with a multimeter.
3
Check wiring for damage, corrosion, or loose connections at the switch and window motor.
4
Use an OBD-II scanner to check for related error codes.
5
Verify voltage supply to the window motor while pressing the switch.
6
Test the window motor directly by applying power from a battery source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Socket set
•Trim removal tools
•Fuse puller

Parts Required

•Power window fuse (if blown)
•Power window switch (if faulty)
•Window motor (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Power window switches do not respond when pressed

•Windows are completely unresponsive

•Clicking noise when pressing the window switch (indicating motor engagement)

•Driver's side master switch not functioning for any window

•Individual window switches work intermittently

•Window operates slowly or only partially opens/closes

Diagnostic Steps

1
Inspect the window fuse for continuity using a multimeter.
2
Test the power window switch for proper operation with a multimeter.
3
Check wiring for damage, corrosion, or loose connections at the switch and window motor.
4
Use an OBD-II scanner to check for related error codes.
5
Verify voltage supply to the window motor while pressing the switch.
6
Test the window motor directly by applying power from a battery source.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect and Replace Fuse

Locate the fuse box, usually found under the dashboard or in the engine compartment.
Remove the power window fuse using a fuse puller.
Check for a blown fuse, which appears cloudy or has broken filament.
If blown, replace with a new fuse of the same amperage (check the owner's manual for the correct rating).

3. Replace Power Window Switch (if faulty)

Remove the door panel using a socket set and trim removal tools.
Disconnect the wiring harness from the window switch.
Replace the window switch with a new part.
Reconnect the wiring harness and reassemble the door panel.

4. Replace Window Motor (if necessary)

After confirming the switch is functional, access the window motor by removing the door panel.
Disconnect the wiring harness from the window motor.
Remove the motor mounting screws and take out the old motor.
Install the new window motor, ensuring it is securely fastened.
Reconnect the wiring harness and reattach the door panel.